1/2 INCH 1" INCH HORIZONTAL AIR COMPRESSOR IN LINE CHECK VALVE

These are used to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes and prevents backflow from the receiver. Max 500 psi & max temperature 232°C (+450°F). They have a 1/8" NPT unloader port.

HORIZONTAL IN LINE CHECK VALVE

• Application: where an in tank check valve will not fit, the IC valve can conveniently be installed right in the discharge line of the compressor.

• Construction: brass body glass filled flouropolymer poppets and stainless steel springs for long life.

• A plugged 1/8 NPT unloader port is standard on the 1/2″ & 3/4″ models.

  
  

  FEATURES

  • Check valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss
  
  

  • High strength ductile iron body used for durability and less weight.
  
  

  • Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss.
  
  

  • One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve.
  
  

  • Coated with powder epoxy both inside & outside for corrosion resistance.
  
  

  • Bronze bushing reduce wearing problem during operation.
  
  

  • Hydrodynamic design with spring ensures non slamming and water hammerless.
  
  

  • Stainless steel spring hidden in the diffuser under protection while valve in operation.
  
  

  • Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec.
  
  

  • Installation can be vertical/horizontal/inclined.
  
  

  • Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension.
  
  

  APPLICATIONS

  Steam, superheated water, hot water, cold water, fluids without acidity or alkalinity properties,chemicals

  Feature of check valve: 

     A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid to flow through

  it in only on direction.

     Check valves are two-port valves, meanting they have two openings in the body,   one for fluid to enter   and the

  other for luid to leave, there are various types of check valve used in a wide variety of applications, check valve are

  often part of common houshold items,   They work actuomactically and most are not  controlled by a person or any

  external control, 

  
  

  We also make the electric actuator:

  
  

  FOLS electric valve actuator has the multi-funtion such as: ON/Off function,regulating functhion

  (whatever you can adjust the dis of butterfly valve), it depens on your technical for butterfly valve.

  
  

    We have different kinds of butterfly valves, each adapted for different pressures and different usage. The zero offset

  butterfly valve, double offset butterfly valve, the triple offset butterfly valve. also has different connect type: flange conn-

  ection butterfly valve, wafer-style butterfly valve, At last: Concentric butterfly valves, Doubly-eccentric butterfly valves(

  double-offset butterfly valve) Triply-eccentric butterfly valves ( triple-offset butterfly valves), We waiting for your selectin.

  
  

  Pindly noted: all this butterfly valves can assemble our electric actuators

  
  

   Our valve actuators for difference sizes of ductile iron butterfly valve